If your network has high-volume traffic at particular times, or you are using a long-distance phone connection, you can enable batch transmission to send images during off-peak hours only.
To configure times to send images
On the Setup tab, click Network Management.
Switch to the Configuration tab.
From the list at the bottom of the manager, select the station to configure.
Select the Batch Transmission checkbox.
Set a Start Time for the transmission (hh:mm).
This field and the Stop Time field use a 24-hour clock. For example, for 7:30 PM, type 19:30.
Set a Stop Time for the transmission (hh:mm).
Click Save.
 | Tip: You can override this setting when necessary by using the Expedite Jobs feature. |
Required permissions
Administration Tools: Network Manager > View operation